90° Cord Grip Connectors 1/2″ to 1″ CG Series Made in the USA
Available in Steel, AL ,& Stainless Steel Constructions 

Ideal for robot manufacturers, packaging equipment, machine tool building, & other industrial OEM and MRO applications.
Demanding Conditions Demand the BEST Our Cord Connectors are  Superior to ALL  CGB, TnB Connectors

Take a Turn With the BEST 90° Cord Grip Made.

Cable Ranges from .150″ to 1.050 Trade Sizes 1/2″ to 1″
Cord Grips completely eliminate pull tension on terminals, control cable arc-of- bend, prevent cord pull-out, and provide a liquid-tight seal.

AMFICO CG 90 Connector USA
AMFICO CG 90 Connector USA

AMERICAN FITTINGS SPEC-grade 90° Cord Grip connectors are the ideal choice for environments and applications where product integrity is your prime concern. AMFICO cord connectors ARE suitable and are currently used in many industries; including; petroleum, food processing, chemical, wastewater treatment, HVAC, aerospace, electric power, automobile, paper mills, pumps.  Our cord grips are the ideal choice for all your cable requirements. Available in Alloy Steel and Stainless Steel construction.

AMFICO’s fully machined unique design is ideal for indoor or outdoor locations where continuous or intermittent moisture is present and positive bonding to conduit, box, or enclosure is required. Together, the flexible metallic conduit and fittings protect conductors from damage due to excessive vibrations and contaminants, such as moisture, oils, and dust. Arc of Bend Radius of cable is never a problem with AMFICO,

  • Santoprene Grommets for Moisture-Proof Seal
  • EZ Installation No Disassembly is Required
  • Liquidtight/Oiltight/Raintight
  • Suitable for NEMA 4 Enclosures & Wet Locations
  • Male tapered thread NPT
  • Colored Grommets Allow for Easy Identification

Cat Numbers & Dimensions

Cord Grip Connectors 90 deg Dimensional Table American Fittings

True 90° Angle for an EZ Cable Pull. No sharp binding edges or burrs to snag your cable. 

Also Available Straight, 45° Connectors, & 90° & 45° CG Connectors with Stainless Steel Wire Mesh Grips

AMFICO Cord Grip CG Wire Mesh 90

.

Configurations:

Material Construction Alloy Steel and  Stainless Steel
Trade Sizes: 90° Connectors Up to 1″ Trade Size

Features:

The design of the Connector provides a true arc of bend for flexible cords.
* Santoprene is a fully dynamically vulcanized ethylene propylene diene monomer (EPDM) rubber in a thermoplastic matrix of polypropylene (PP). FDA Approved and Safe for Processing Washdowns.
Fully Reusable Design
Full Flat Hex Surfaces on Compression Nut and Body Provides Full Torque Without Damage to Fitting

Available Option:  Industrial Grade Steel Locknut & Sealing Washer

Compliances:

Certified Made in the USA

UL 514B
NEMA Standard FB1 Rated Liquid Tight
Federal Standard A-A-50553
UL Rated Suitable for Hazardous Locations
Operating Temperature Range (normal use): -20ºC to +105ºC (-4°F to +221°F)
Grommets are Santoprene Material UL Rated 94VO and FDA Approved
NEC: Class I, Division 2
Class II, Divisions 1 and 2
Class III, Divisions 1 and 2
NEC 501-4(b), 505-4(a), 503-3(a)
RoHS Compliant
REACH Compliant
CA Prop 65 Compliant
UNSPSC 39121420

American Fittings UL Logo